seabet app
Release time: 2020.10.22It is easy to raise a car when driving
It is even more difficult to raise a car
Change oil, change filter, change air filter element
Replacement of air -conditioning filter, brake pads, brake oil
These components need to be replaced regularly
Of course, the old driver is a light car
But there is one thing, but there is always neglected
Many old drivers have not changed for many years
In this case
What is this thing?
Open its mysterious veil for you
It is not easy to raise a car，In addition to checking the replacement oil、Machine filter、Air filter element, etc. ... There are still things that you have never noticed that you have to replace it.。That is -replacement: sealing!
The car has been driving for a long time，You will find that the sound of the switching door changes a bit，Not the original soft and sullen voice，but the sound of "duang ... duang"; seabet appor you find that the sound insulation effect in the car is getting worse and worse，The noise is getting bigger; or you find that the car always seems to be leaky，No matter how much the air conditioner is turned on。Actually，These signs are likely to be the performance of replacing the sealing strip。
Why replace the sealing strip?
Why replace the sealing strip?
Except around the door，Sealing strips in the window、Sky window、The engine compartment、Trunk and other parts are available，The role played is sealed，If the sealing effect is good，Not only sound insulation and noise reduction，can also be waterproof、Windproof。
but，The material of the sealing strip is mainly rubber，Although there are sulfurized rubber、Silicon Rubber、Club、Ding 腈 rubber、Thermoplastic elastic body、Thermoplastic sulfide (TPV)、Plastics polyvinyl chloride (PPVC)、Surface coating materials and other materials，However, because the sealing bar is a passage in the car and outside the car，Need to face the test of severe cold and heat every day，So the time of these materials will definitely be aging、Broken。
What should I pay attention to when changing the sealing strip?
In addition to the poor sound insulation effect mentioned above、Leakage and other conditions，If there are obvious rubber cracks or visible damage on the sealing strip，It means that it will be replaced。
First，Before replacing the sealing strip, you must select the styles based on the seal bars used on your own model，The sealing strip used in different models may also be different。
Second，After selecting the sealing strip，Clean seabet loginup the original sealing strip before installation。After disassembling it，Place you need to clean the sealing strip，Especially those old dust and sand，It is best to apply a layer of protective agent with conditions，This can prevent the sealing of the seal from aging and greatly improve the sealing of the sealing strip。
Third，When changing the door density sealing, pay attention to the reserved position for the door drainage hole for the door，There is one or two drainage holes below the door，If you don’t pay attention to it ... It's troublesome。
Fourth，If there is abnormal noise when the window is rising，Most of them are also due to the problem of sealing bar，If the location of the sealing strip is adjusted, the abnormal noise cannot be solved，Then you need to consider replacing the windows of the car window。
Fifth，The sealing strip of the auto sunroof also needs to be paid attention to，Because it is exposed in the air for a long time，sun and rain are more serious，Some damaged sealing strips may also cause the skylight leakage、Leakage。So，Sky window sealing strip should also pay attention to timely maintenance or replacement。
Generally speaking，Door、The engine compartment、The sealing strip of the trunk is easier to replace，If your own ability is strong，I can do it yourself; if it is a sunroof、The sealing bar in these positions of the window needs to be replaced，May need to go to a professional maintenance shop for treatment。
