1. Step on the brakes, slow down to parking;

2. After stopping, hang it in N gear;

3. Tighten the handbrake;

4. Release the footbalb to confirm the stop of the vehicle;

5. Step on the footbalb and hang into the P gear again;

6. Stalling away;                                       

The reason why it is so complicated，Because Xiaozhi feels that this can let the handbrake carry the "sloping force" of the car，Reduce the pressure of the transmission P gear。It seems that there is reasonable and well -established，But the instruction manual of the car has Seabetnever been required，Why is this?

Below，Let me help seabet myyou unveil the veil of P gear，First introduce the P gear (parking gear) of the automatic transmission (parking gear)。

P gear "Parking Claw" and "Parking Gear" two main components，Parking Ritting Gloves Holding the Parking Gear，The transmission axis is locked。If you don't pull the handbrake，Like p block lock，So all slopes will be carried on the parking pawns and parking gears。But if you pull the handbrake when you are in N，Hanging p block，So the handbrake that carries things，Not "parking paw" and "parking gear"。The complex operating process of that online transmission，In fact, it is to teach you how to do this。But is it really necessary?

In fact, in the research and development stage，Automobile engineers have already considered these situations。During the research and development stage, "parking paw" and "parking gear" are designed very strong，enough to cope with daily use。Generally speaking，P block lock device is enough to deal with the destruction of about 20000N。

"Parking Claw" and "Parking Gear" generally use low -carbon alloy steel，Then process the hard -quenching layer on the surface，While with good toughness，can also enhance wear resistance。That is to say，"Parking Claw" and "Parking Gear" not only wear -resistant，and resistance，enough to easily cope with the various scenes we encountered in our daily life。A full calculation has been made when the automatic transmission is designed，R & D and production stage also made a lot of rigorous tests -for example, hang the car with only the P block，Stop on a steep slope，Find five big fat people in the car，The seabet logingearbox can be easily dealt with。

I believe many people have encountered this situation，Want to pick it out from the P gear，Sometimes I feel laborious。

As said in the Internet，Due to gravity reasons when parking，"Parking Claws" and "Tooth Corps" closely fit，To pull out the "parking thorn paw"，It is necessary to overcome the friction between the two。​​The greater the strength of eating on the "parking spiny paw"，The more labor is picked by p block。

This is why when the ramp starts，The reason why it is often worked out from P gear。But you need to explain，For vehicles equipped with an electronic gear,，The driver does not feel this，Because the blocking force is not the feedback on the handle,。

So much mentioned earlier，Most of our situations are parking and starting on flat roads or slow slopes，In this case，What kind of step，Automatic transmission indicates no pressure。But if you stop on a steep slope，How to operate can improve comfort，Prevent the car slightly sliding after the car is mounted?

Xiaozhi will give you a move here，Also proposed a "special correct" method:

1. Step on the brake pedal and tighten the handbrake;

2. Hanging into the P gear, turn off the fire;

In fact, the essence is in one sentence: first pull the handbrake, and then hang the P file.

Careful design、A well -ingredient transmission lock device does not require you to wait for your heart and lungs。