I shared with you a fast and effective car watching method，Methods suitable for junior car inspection，Just look at screws! Intersection，But for beginners, "rather kill a thousand must not miss a net", at least you can't buy an accident car! Intersection，See where to distinguish the accident! Intersection Okay, let's start with a small white to see the car，Open the cover to go straight to the machine cover screw，The hood screws are painted! As long as you find the screw paint surface damage，It is proved that the machine cover has been disassembled，There is a story here。Of course, no one will disassemble the cover or replace the seabet appmachine cover for no reason! Intersection

This is the traces left after the cover of the cover. After reading the picture, I will tell you why the cover is disassembled，During the re -use process of general vehicles，A collision camera into a lid deformation，At this time, the cover must be removed and repaired，Of course, small scraping does not need to be removed and make paint，Can you understand it? Cover disassembly proves that the stress surface must be repaired or replaced with the cover。So pay attention at this time! The second one looks at the water tank frame screw，Here is the water tank framework.，If it is a solder joint connection, don't care about him，Then depending on the attachment screws on the water tank frame，headlights and the like If the screws are not moved, it means that the previous problem is not big! Intersection，Look at Figure below

This is the connection screw of the water tank framework headlight Some have paint surfaces without Careful experience here to talk about the headlight screw is not the key point. Sometimes the accessories replacement must move，Mainly depending on the water tank framework screw，Be careful! Intersection，It is very important to fix the screw of the screw of the engine on the longitudinal beam，The purpose of disassembly is three 1. The accidental beams need to be repaired (that is, a big accident, the front face of the longitudin car is gone) 2. Engine maintenance or repair 3. Replaceable foot pad. It is unclear to help the identification in combination with the first two screws ​​Look at the picture

This is the screw that is not twisted. If it is not the same as the screw in the figure above or has a black mark, it proves that it has been twisted Cute it. The fourth is to see the door screw，Generally, small scraping does not need to remove the door to repair，The big collision door must be removed or replaced，So door screws are very important! Intersection

This is a very good distinguished with lacquer surface，Japanese cars generally do not bring paint surface to see if there are black marks door disassembly instructions.，Give up if you have no ability to detect the border of the car! Intersection，If the collision intensity is high, it must cause damage to the trunk cap，The strength of the trunk lid is very large.，Small scraping does not need to be disassembled! Intersection

This is the disassembly rear box cover. Generally, the paint surface is painted.，May repair or replace the trunk cover! Intersection，The above identification methods must be carried out according to the steps to be more accurate! Intersection。Finally, this method is simple and rude，Very easy to distinguish，But it may hurt a good second -hand car，But it is indeed a good way for friends who want to buy used cars and are inaccurate。