Recently, there are always friends who react to the editor to say that the car burns oil，So let's take a look at the car burning oil today!

1. Because domestic fuel quality is not synchronized with international standards，Make the engine during seabet iodriving，It is easy to form a large amount of carbon deposits in the burning room，Carbon accumulation is an important cause of various problems that cause engine oils such as engine oil。

2. Carbon accumulation will be deposited in the groove of the piston，Caused the Pistons to stick together，This causes the piston ring card to die completely，The oil will enter the burning room to burn it，and The Pistons of "Sticky" have greatly reduced the ability to scrape oil，The oil that has not been scratched will also be burned。

3. Long -term formed sludge cannot be cleaned up，It will also block the oil back hole on the piston ring，As a result, the oil cannot return normally，Make the oil in the burning room and burn。

4. Carbon accumulation will exacerbate the wear between the piston and the cylinder wall，Caused an excessive gap，As a result, the oil enters the burning room and burn it。

5. Videline oil seal corrosion aging，Caused a bad seal，Machine oil will miss the burning room and burn it。Valley oil seal can be said to be the most prone to damaged parts in the engine，Basically driving a car over 100,000 kilometers，All have this problem。

6. Forest axis oil seal aging，The front and rear crankshaft oil seals are large and the oil is large and continuous contact，The continuous temperature changes in the engine and the continuous temperature changes in seabet appthe engine gradually weaken the sealing effect，First, it will cause oil exudation or oil，Increasing the consumption of engine oil; second, the oil steam will also overflow in a weak place in a weak place，Cause oil loss。

7. turbocharger failure，First, due to the damage of sealing ring damage, oil leakage，Machine oil is burned into the combustion chamber through the air inlet pipe of the engine; the second is the problem of oil quality caused by the quality of the oil，Bearing wear，Increased oil consumption caused by motor oil。

8. There is a high percentage of fuel in the oil，Poor fuel supply system、Poor fuel atomization，It will make fuel or a large amount of over -strong fuel mixture into the crankshaft box and mix with the oil，Dilute the oil，Caused the oil to consume too much。(The content of the article comes from the Internet，If you involve the copyright, please contact delete)