The deceleration band is safe and played as a purpose of buffering and slowing down in driving，Improve the safety of the traffic channel。How do I pass the deceleration belt when driving?

Correct approach: Passing low -speed vertical low speed through
Vertical passes is also a direct deceleration Seabetbike。Although the bumps and bounces of the car are more obvious，But the left and right wheels shrink at the same time，The force from the ground is the spring of the two wheels、The shock absorber jointly shared the semi -sharing，Uniform force，This way, although the people in the car feel the vibration of the car is strong，But effectively reduced the damage to the car itself。
Common error methods for overlapping bands:
The first unilateral winding band.
Many drivers are accustomed to the right -road road when the deceleration belt is used to reduce the deceleration belt，Let the wheel on the left side pass through the reducer pass，The wheels on the right side pass by the road; they think this can reduce the vibration of the car，can also reduce the loss caused by the deceleration brought to the car。
In fact，Frequent unilateral bypassing the deceleration zone，The car will appear high on one side and low，Long this time，The car will be damaged。If the wheels are the phenomenon,，Four wheel positioning should be done in time，Reduce the wear of the tire，Strengthen driving safety。
The second kind of obliquely overlap band.
We often feel when taking a car，Vertical overlapping belt，The bumps of the car、The bouncing feeling is greater than oblique; therefore，Most people think that the car is cleansing over the deceleration belt seabet myand feels more comfortable。
However, the truth is oblique over the deceleration belt, which can easily cause unevenly left and right stresses，For spring、shock absorber and the entire body，More losses will cause。Because the vehicle overlapped is actually the pressure movement of the tire on the ground and the body，Except suspension and wheels，The body will also absorb vibration，thus slowing the vibration passed on the person。
The third high speed overlap band.
During the driving, high speeds will bring damage to the suspension system of the car through the deceleration belt。Especially the car with lower chassis，When passing through the deceleration belt，Remember to reduce the speed。
The vehicle overlapped belt will definitely cause a certain impact on the car，But if you can control the speed of the car，This impact will be controlled in the range that the car can bear。