Do you want to be in the car business?？Driving is a very deep skill，New car owners don’t know many of these tips，Even experienced drivers with certain driving experience may not know。here，Let’s take stock of the common sense after car maintenance that deserves our attention。

Many car owners will inevitably encounter car breakdowns that prevent normal driving，At this time, most people choose to go to the repair shop。But many car owners usually go to repair shops，After picking up the car, drive on the road without doing any inspection。Many car owners will ask: "What's the problem?"？There once was an experienced master，Recommended after car repair，Do not drive on the road immediately，But you need to check the repaired car yourself，Check if there are any areas that need rework。Actually, this is quite correct，It is inevitable that other components will be affected during the repair process，This requires the car owner to inspect the car himself，Discover problems in time and rework，It can avoid accidents and avoid costly repairs again。To the repaired car，Car owners need to perform these two operations on them respectively:

During stationary check，The car should be parked on a flat surface，Easy to check。This inspection Seabetmethod is mainly to ensure that other components of the vehicle have not been affected during the maintenance process，Is there any discrepancy in tire pressure between the left and right tires?，Left and right springs and shock absorbers，Deformation of the frame or fenders, etc.。Observe the appearance of the vehicle separately during inspection、Check in front of the car、Cab inspection、After-vehicle inspection、Check the fuel tank、Operation of spare tire installation。

Usually appears after repair，The left and right tire pressures are inconsistent，Left and right springs and shock absorbers，Uneven conditions such as deformation of the frame or fenders。Car owners need to check the cab from the front of the car、Engine Hood、Left and left fenders、Front bumper, etc. for inspection，Judge whether the above aspects are fair。

The owner is in the process of inspection，You need to go to the car to check whether the bumper and tow hook are firm，Radiator guard、Engine Hood、Are there any uneven cracks on the fenders and cab，Whether each connecting bolt is firm，Is the headlight installed securely。And enter the cab to check whether the door switch is light，Is the door and window glass flexible to lift and lower?，Is the foot pedal installed securely，Is the front windshield cracked, etc.。

And，When the car owner takes a closer look behind the car，Pay attention to whether the carriage is level，Rear light、brake light、Is the license plate etc. installed securely。And check the fuel tank、Is the spare tire installation in normal condition。

Through the above operations, we can promptly detect the adverse conditions that occur during the maintenance process of the vehicle，So as not to affect safe driving。

After stationary inspection of the vehicle，After ensuring everything is normal，Inspections are also required during driving to see the comprehensive performance of each assembly seabet iocomponent of the vehicle。This is mainly to check the instruments，Gearbox、Clutch、Drive shaft、Whether the differential and other transmission components are working properly and the instruments are working properly。

When checking while driving，The engine should be allowed to reach normal temperature，And pay attention to check whether the working conditions of each instrument are normal。Driving，Pay attention to whether the clutch is completely separated，Is the joint smooth and reliable，No trembling、Abnormal sound。At the beginning of the inspection process, the vehicle should be driven at a low speed of 2-3 kilometers，In this process, the temperature of each component of the chassis is raised to normal，Pay attention to whether there are any abnormal noises from various components。Tap the brake pedal lightly，And try to see if the brakes are flexible and effective，Then increase the speed。When trying to turn the steering wheel，The direction system should be light and flexible，No deviation。

And intentionally accelerate or decelerate the vehicle，Listen carefully to the gearbox during this process、Clutch、Drive shaft、Is there any noise in the differential，At different gears and different speeds，Allow gears to have different slight sounds，But no knocking is allowed，In any gear，Allow the gears to have a momentary knocking sound when the speed changes suddenly。The drive shaft must not make any noise during normal driving。Choose a suitable venue，Inspection vehicle minimum turning radius，The turning radius must comply with the original vehicle regulations。

Perform pre-driving inspection of maintenance vehicles，The purpose is to enable car owners to drive safe and reliable vehicles，Avoid accidents caused by inadequate maintenance。Let’s play with cars together to remind everyone，For seabet appthe safety of yourself and your car, you must remember these necessary driving common sense。

(The content of the article comes from the Internet，If copyright is involved, please contact us to delete)